eGrip II Starter Vapor Kit
Joyetech eGrip II All-in-One Starter Kit
The Joyetech eGrip II is the updated version of the original all-in-one Joyetech eGrip. The Joye eGrip II is considered to be an all-in-one starter kit which features a built-in battery and tank similar to the Aspire Plato and the original eGrip. The Joye eGrip II is powered by a 2100mAh built-in battery and has a 3.5ml e-Liquid capacity. The maximum output of the device can be reached up to 80 watts. The Variable Temperature Control system features support for Nickel (Ni), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The Joye eGrip II also features Bypass and Temperature Coefficient of Resistance (TCR) modes. This device may be charged and download future firmware updates via the Micro USB Port.
The Joye eGrip II utilizes the Joye Cubis atomizer heads which includes the BF SS316, Ni200, Clapton and NotchCoil atomizer heads. The included NotchCoil 0.25ohm DL (Direct Lung) atomizer head provides a great vaping experience. The NotchCoil lasts much longer and can be used under high wattage conditions. The Joye eGrip II Kit also includes a BF Rebuldable Atomizer (RBA) M&L Head for vertical coil builds. The Replacement Cubis BF RBA Head is also compatible if you prefer to build your own coils. You may also use 510 threaded tanks along with the eGrip II using the included Atomizer Adapter.
The TFTA-Tank (top filling and top airflow tank) design features a convenient top fill and a top adjustable airflow valve. Atomizer heads and e-liquid may be easily refilled and replaced by removing this top section of the device. The Joye eGrip II applies two sets of battery protection circuit system which makes it more advanced and reliable. The Joye eGrip II features a large 0.96" OLED display screen with seven different e-Liquid illumination LED lights for a beautiful and unique vaping experience. In addition to the Joye eGrip II Starter Kit, you only require e-Liquid to start vaping.
Features and Specs:
- Dimensions: 3-7/8" x 1-3/4" x 7/8"
- All-in-One Personal Vaporizer
- Battery Capacity: Built-in 2100mAh Battery
- 3.5ml e-Liquid Capacity
- Wattage Output: 1.0 - 80.00w
- Variable Temperature Control : Nickel / Titanium / Stainless Steel 316/ TCR
- Temperature Control Range: 100 - 315C / 200 - 600F
- Bypass (Direct Output Voltage) Mode
- Resistance Range: 0.05-1.5ohm for Variable Temperature Control Mode
- Resistance Range: 0.1-3.5ohm for Variable Wattage and Bypass Mode
- Utilizes the Joye Cubis Atomizer Heads such as the Joye NotchCoil SS316 0.25ohm
- Includes (1) NotchCoil 0.25ohm DL, (1) BF SS316L 0.5ohm DL, (1) BF Clapton 1.5ohm MTL Atomizer Heads
- Includes (1) BF Rebuildable Atomizer M&L Head (Vertical Rebuild)
- 510 Threaded Tanks may be used with the included Atomizer Adapter
- Top Fill Design
- Top Airflow
- Large 0.96" OLED Screen
- Real Time Clock Display
- Game Mode
- Features 7 Different e-Liquid Illumination LED Lights
- Bottom Ventilation Holes
- Micro USB Charging Port
- Upgradeable Firmware
- Over-charging Protection
- Over-current protection
- Over-discharging Protection
Please note: Temperature control requires the use of nickel, titanium, stainless wire.
Tips for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.
- 1 x eGrip II All-In-One Device
- 1 x NotchCoil 0.25ohm DL Atomizer Head
- 1 x BF SS316 0.5ohm DL Atomizer Head
- 1 x BF Clapton 1.5ohm MTL Atomizer Head
- 1 x BF RBA M&L Head (Vertical Rebuild)
- 1 x Drip Tip
- 1 x Micro USB Cable
- 1 x Atomizer Adapter
Advanced User Item. Use at Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Vapor Parrot is not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). Vapor Parrot is not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Vapor Parrot will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly